Parkside Plasma Cutter PPS 40 LIDL PDF OPERATING INSTRUCTIONS MANUAL

Parkside PPS 40 A1 :

Modèl PPS 40 A1

IAN : 307722

manufacturer : C.M.C. GmbH

Intended use : The device is intended for compressed-air plasma cutting of all electrically conductive metals.

The device must not be used: in insufficiently ventilated rooms,

• In moist or wet environments,
• in explosive environments,
• to defrost pipes,
• in close proximity to people with cardiac pacemakers and„ in close proximity to easily flammable materials

Safety instructions (please read the instructions for use)

If the device is not in operation, always switch it off by pressing the ON/OFF switch. Place the electrode holder on an insulated surface and only remove it from the holder after allowing it to cool down for 15 minutes.

Remove all flammable materials within 10 m of the plasma cutter

Protect yourself and others from flying sparks and hot metal.

Do not use the plasma cutter to defrost frozen tubes.

Inhalation of welding fumes can endanger health you need to Use a extractors to remove the fumes.

Wear protective clothing prior to welding work

Wear gloves

Open windows to guarantee air supply

Wear safety goggles

Maintenance and care (please read the instructions for use)

the electrode, diffuser and the nozzle can be replaced once the nozzle clamping sleeve has been unscrewed.

if there is a crater of approximately 1.5 mm depth in the centre, The electrode must be replaced.

The nozzle must be placed if the central bore is damaged.or if it has expanded in comparison to a drilling of a new nozzle.

Warranty and service information

Warranty : 3 years from the date of purchase

Phone: :0-808-189-0652

E-mail : service.gb@cmc-creative.de

useful links

PDF operating instructions

features, accessories and video